Cold Side Air Intake for NA 1.8 by Jass Performance
€195.00
Enhance your Miata NA 1.8’s performance with the Jass Performance Cold Side Air Intake. Enjoy reduced intake temperatures and increased power.
Unlock the true potential of your Miata NA 1.8 with the Jass Performance Cold Side Air Intake. Designed specifically for the Miata NA with a 1.8 engine, this intake offers numerous benefits, including reduced intake air temperatures, thanks to its strategic placement far from the exhaust manifold.
Enjoy ambient and below air intake temperature levels due to the cold air stream from the Jass Stealth Headlights or TSIs. The Cold Side Air Intake was the reason the Jass Performance Fixed Headlights were developed for MX5 NA.
Advantages
- Reduced Intake Air temperatures, being on the cold side (far from the exhaust manifold as the OEM setup).
- Ambient and below Air Intake temperature levels, due the cold air stream from the Jass Stealth Headlights or TSIs.
- Increased response, due to the significantly shorter intake tract.
- Increased high end power, due to shorter intake tract.
- Increased air flow, due to optimized design vs. OEM. Smoother, with less bends and larger diameter.
The kit works only with MX5 NA with 1.8 engine, due to the smaller size of the MAF sensor.
It is only possible to be installed with the Jass Performance Stealth Headlights, which clear the needed space for the air filter.
The kit consists of
- Air intake, optimized for air flow and clearance from the water hoses. The setup is tested with OEM radiator, although it will work with aftermarket aluminium radiators, it might interfere with the water hose.
- Silicon hoses, clamps to attach to air intake, MAF and air filter. Two options are available – black and red for the silicon hoses.
- K&N Air filter – the biggest possible filter to fit in the available space.
- Breather filter for the rocker cover – two matching color options available again – black and red.
- Polycarbonate Splash Guard for the air filter in case the kit is used with TSIs.
The Air intake is supplied partly assembled and the hardware installation is straight forward. However the MAF connector needs to be rerouted to the new position (originally at the rear left corner, connects now at the front right). Connector extension is not delivered, you should extend the cables yourself or source extension cable for the purpose.
Check out related products:
Shipped Worldwide from Europe (Spain, Bulgaria or the United Kingdom, depending on customer location).
(Payment of any taxes or import duties in the country of destination will be the responsibility of the recipient.)
Reviews
There are no reviews yet