4.8
Based on 404 reviews

Customer Images

Image #1 from Richard Ventrone
Image #2 from Richard Ventrone
Image #3 from Richard Ventrone
Image #1 from M. A. Taylor
Image #2 from M. A. Taylor
Image #3 from M. A. Taylor
Image #1 from Krystian Stodolny
Image #1 from arnaud.jubineau
Image #1 from Stephen Voisey
Image #1 from Gerard Daly
Image #1 from Richard Ventrone

Richard Ventrone

These seat covers are beautifully engineered. If the time is taken to take out the seats, which is very easy to do, and carefully install them, they fit perfectly and appear to have been installed at the factory. They have transformed the interior of my car.

(0) (0)
Image #2 from Richard Ventrone

Richard Ventrone

These seat covers are beautifully engineered. If the time is taken to take out the seats, which is very easy to do, and carefully install them, they fit perfectly and appear to have been installed at the factory. They have transformed the interior of my car.

(0) (0)
Image #3 from Richard Ventrone

Richard Ventrone

These seat covers are beautifully engineered. If the time is taken to take out the seats, which is very easy to do, and carefully install them, they fit perfectly and appear to have been installed at the factory. They have transformed the interior of my car.

(0) (0)
Image #1 from M. A. Taylor

M. A. Taylor

I wanted to make the engine look just a little bit better and this cover looks great! Easy to install with just a Phillips screwdriver and a sharp knife to trim the inserts to size...work slowly and don't trim too much!

(0) (0)
Image #2 from M. A. Taylor

M. A. Taylor

I wanted to make the engine look just a little bit better and this cover looks great! Easy to install with just a Phillips screwdriver and a sharp knife to trim the inserts to size...work slowly and don't trim too much!

(0) (0)
Image #3 from M. A. Taylor

M. A. Taylor

I wanted to make the engine look just a little bit better and this cover looks great! Easy to install with just a Phillips screwdriver and a sharp knife to trim the inserts to size...work slowly and don't trim too much!

(0) (0)
Image #1 from Krystian Stodolny

Krystian Stodolny

As far as fiberglass goes the fitment is amazing. 10/10 would buy again 😀

(1) (0)
Image #1 from arnaud.jubineau

arnaud.jubineau

Ces clignotants séquentiels qui font feux de jour à la fois modernisent bien la voiture, quand les feux de jour sont allumées et que l'on met un clignotant, le feu de jour concerné s'éteint pour laisser la place au clignotant, ce qui est bien pour les autres usagers qui voient bien vers quelle direction on va. Les veilleuses éclairent très bien voir un peu trop, a voir avec la version "smoked" si c'est plus atténué. L'effet des clignotant en s'activant est sympa, l'espèce de cercle, cela fait comme chez certaine voiture de chez Audi mais un petit trop rapide à mon goût. Simple à installer, c'est du plug-and-play, cependant ils ne fit pas parfaitement dans leurs emplacements comme ils sont moins épais, j'ai mis du double face épais et pas très collant et plus de soucis. Très satisfait de mon achat et pas de frais de douane depuis la France et j'ai commandé le 08 novembre et j'ai reçu le colis le 18 novembre donc quand même très rapide. Je vous ai mis une photo de ces clignotants posé sur ma mx5 pour faire un aperçu du rendu.

(3) (0)
Image #1 from Stephen Voisey

Stephen Voisey

Very good quality product arrived in good time thanks

(0) (0)
Image #1 from Gerard Daly

Gerard Daly

Top quality

(0) (0)
Image #1 from Richard Ventrone
Image #2 from Richard Ventrone
Image #3 from Richard Ventrone
Image #1 from M. A. Taylor
Image #2 from M. A. Taylor
Image #3 from M. A. Taylor
Image #1 from Krystian Stodolny
Image #1 from arnaud.jubineau
Image #1 from Stephen Voisey
Image #1 from Gerard Daly
Easy Fitting Fast Delivery Great Looking Quality Product
1-5 of 309 reviews
  1. These seat covers are beautifully engineered. If the time is taken to take out the seats, which is very easy to do, and carefully install them, they fit perfectly and appear to have been installed at the factory. They have transformed the interior of my car.

    Image #1 from Richard Ventrone
    Image #2 from Richard Ventrone
    Image #3 from Richard Ventrone
    (0) (0)
  2. (0) (0)
  3. I wanted to make the engine look just a little bit better and this cover looks great! Easy to install with just a Phillips screwdriver and a sharp knife to trim the inserts to size…work slowly and don’t trim too much!

    Image #1 from M. A. Taylor
    Image #2 from M. A. Taylor
    Image #3 from M. A. Taylor
    (0) (0)
  4. very beautiful, perfect positioning on the seats, excellent manufacturing quality

    (0) (0)
  5. This went on great! Easy to install if you have it jacked up and are gentle with aligning the bolts with nuts. I am curious on torque settings though.. There were not instructions but the install is pretty self explanatory.

    (0) (0)

Main Menu