Looking for help?
< All Topics

Miata Tire Pressure


When it comes to the performance and safety of your Mazda Miata, tire pressure plays a vital role. Proper tire pressure ensures optimal handling, fuel efficiency, and tire longevity. In this article, we will discuss the importance of maintaining the correct tire pressure for your Miata, how to check it, and the benefits of doing so.

Importance of Tire Pressure Maintenance

Maintaining the correct tire pressure is crucial for several reasons. Firstly, it directly affects your Miata’s handling and performance. Underinflated tires can lead to reduced traction, longer braking distances, and compromised cornering abilities. On the other hand, overinflated tires can result in a harsher ride and increased vulnerability to road hazards. Secondly, proper tire pressure promotes even tire wear, ensuring a longer lifespan for your tires. Lastly, maintaining the recommended tire pressure can enhance fuel efficiency, saving you money in the long run.

Recommended Tire Pressure for Miata

To find the appropriate tire pressure for your Mazda Miata, always refer to the manufacturer’s recommendations. The recommended tire pressure can typically be found in your vehicle’s owner’s manual or on a sticker located on the driver’s side door jamb. It is important to note that the recommended tire pressure may vary based on factors such as the Miata’s model, trim level, and the type of tires installed.

Checking Tire Pressure

Regularly checking your Miata’s tire pressure is crucial to ensure they are properly inflated. Here’s a step-by-step guide:

  1. Start with cold tires, preferably before driving your Miata or at least three hours after the last use.
  2. Locate a reliable tire pressure gauge. Digital gauges are often more accurate than analog ones.
  3. Remove the valve cap from one tire.
  4. Press the gauge onto the valve stem firmly until you hear a hissing sound. This indicates that you’ve obtained an accurate reading.
  5. Read the pressure displayed on the gauge. Compare it to the recommended tire pressure for your Miata.
  6. Repeat this process for all four tires.

Adjusting Tire Pressure

If the tire pressure is too low or high, it’s essential to adjust it accordingly. To add or release air, follow these steps:

  • Adding Air (Inflating the Tires): If the pressure is below the recommended level, you can add air at most gas stations or using a portable air compressor. Simply connect the air hose to the valve stem and add air in short bursts, checking the pressure frequently to avoid overinflation.
  • Releasing Air (Deflating the Tires): If the pressure is too high, you can release air by pressing the center pin in the valve stem with a small tool or the back of the valve cap. Check the pressure frequently while deflating to ensure you reach the recommended level.

Benefits of Proper Tire Pressure

Maintaining the correct tire pressure for your Miata offers several benefits. Firstly, it ensures optimal handling and performance, allowing you to enjoy a smooth and controlled driving experience. Secondly, it promotes even tire wear, extending the lifespan of your tires and saving you money in the long run. Additionally, proper tire pressure contributes to improved fuel efficiency, reducing the frequency of refueling and minimizing your carbon footprint.

Common FAQs about Miata Tire Pressure

  1. How often should I check my Miata’s tire pressure? It is recommended to check your tire pressure at least once a month and before long trips. Regular checks help identify any pressure deviations early on.
  2. Can I use the tire pressure listed on the tires themselves? No, the numbers on the tire sidewall indicate the maximum tire pressure, not the recommended pressure for your Miata. Always refer to the manufacturer’s guidelines.
  3. What happens if I drive with incorrect tire pressure? Driving with underinflated or overinflated tires can lead to reduced traction, uneven wear, increased risk of tire failure, and compromised handling.
  4. Can temperature changes affect tire pressure? Yes, temperature fluctuations can cause tire pressure to fluctuate. It is important to check your tire pressure regularly, especially during extreme temperature changes.
  5. Is it necessary to adjust tire pressure when carrying additional passengers or cargo? Yes, when carrying extra weight, refer to the manufacturer’s guidelines for the recommended tire pressure for the increased load.


Proper tire pressure maintenance is essential for the optimal performance and safety of your Mazda Miata. Regularly check and adjust the tire pressure according to the manufacturer’s recommendations. By doing so, you’ll ensure enhanced handling, increased tire lifespan, improved fuel efficiency, and a more enjoyable driving experience in your Miata. Stay diligent in maintaining proper tire pressure, and your Miata will thank you with exceptional performance and reliability.

Read our article on top 5 performance mods

Table of Contents

Main Menu